PROFIBUS troubleshooting tools
-
PB-Q ONE PROFIBUS tester by Indu-Sol
Buy Now- Fully automated topology scan during operation
- Ease of use, well-structured handling
- Measuring results within seconds
- Simple evaluation through traffic-light function
- Also suitable for PROFIBUS PA (with additional adapter)
-
Indu-sol PROFIBUS INspektor® NT
Buy NowUnlike basic PROFIBUS analyzers that only capture data traffic snapshots, the INspektor® NT continuously monitors your network for signs of trouble. It proactively detects quality issues before they escalate.
-
Hi-Port HP-25 Profibus cable tester
Buy NowThis small handheld device checks for the most frequently found cable connection faults seen with PROFIBUS DP wiring between pairs of 9-pin D-sub PROFIBUS plugs and over daisy chained PROFIBUS cables.
-
Indu-sol EMCheck measuring clamp set XL
More infoThis diagnostics kit includes the following products:
- EMCheck® MWMZ I
- EMCheck® LSMZ I
- EMCheck® ISMZ I
With this set you have all tools on hand to verify the EMC quality of your installed network.
-
Indu-sol EmCheck ISMZ I Current meter
More infoThe intelligent current measuring clamp EMCheck®ISMZ I is a mobile tool for detecting line-based parasitic currents in industrial plants.
-
Indu-sol EmCheck MWMZ II impedance meter
More infoThe only way to ensure good equipotential bonding is proof by measurement. The mesh resistance measuring clamp EMCheck®MWMZ II is the right tool for this purpose
-
Thorsis isNet Lite Headstation
Buy nowThe isNet Lite is an Ethernet gateway in a compact modular housing. It can be used for multiple purposes of remote monitoring and control.
-
Thorsis isNet DPMon PROFIBUS DP module
More InfoWith the isNet DPMon module any gateway built with the isNet Lite can be extended to operate as a PROFIBUS DP diagnosis and protocol monitor.
-
Thorsis isNet PAMon PROFIBUS PA module
More infoWith the isNet PAMon module, any gateway built with the isNet Lite can be extended to operate as a PROFIBUS PA diagnosis and protocol monitor.
-
Anybus ProfiTrace Troubleshooting toolkit Ultra Pro
More info- bus monitor
- oscilloscope
- bar graph
- topology scan
- reporting
- DP master
-
Anybus Combricks, standard monitoring kit
More infoThe big advantage that the COMBRICK has is that it has a history of what has happened to your PROFIBUS network.
ComBricks Standard monitoring kit containing a Headstation 1B and a 1 channel scope repeater.
PROFINET troubleshooting tools
-
Indu-sol PNMA II - PROFINET/Ethernet Measuring point
Buy NowThe PNMA II measuring point/access point is designed to provide easy access to connect diagnostic equipment without interrupting the process. An access point is recommended by PI and should be between the Controller and first switch. The PNMA II is industrially harden and well made.
-
Helmholz TAP IE 100, Ethernet Test Access Point
More infoThe TAP IE 100 access point/measuring point is designed to provide easy access to connect diagnostic equipment without interrupting the process. An access point is recommended by PI and should be between the Controller and first switch. The TAP IE 100 is small and can easily fit into your cabinet.
-
Indu-Sol PROFINET Agent
More infoThe agent is a measuring point/access point plus a basic non-intrusive network monitor. It appears as a PROFINET IO-Device and with simple programming in your controller, you can see who is on the network and measures Jitter, telegram gap, and update rate.
-
Indu-Sol PROFINET INspektor
Buy NowThe INspektor is a non-intrusive detailed network monitor that can be easy accessed by a web-browser. It provides detailed information on the health of your network and a history of what has happened. No programming required.
-
PRONETIQS IntraVUE
Buy NowIntraVUE is a software package that will actively scan your network. It maps every device and connection, identifies developing issues, and displays the network as a living, interactive topology.
-
Profitap ProfiShark 100M
More infoProfishark/EtherTAP is an aggregating TAP used to monitor Ethernet data via a USB connection to your computer.
- 10/100M monitoring on USB
- Non-intrusive, passive monitoring
-
Profitap ProfiShark 1G
More infoProfishark/EtherTAP is an aggregating TAP used to monitor Ethernet data via a USB connection to your computer.
- 10/100/1G monitoring on USB 3.0
- Non-intrusive, fail-safe monitoring
-
Indu-sol EMCheck measuring clamp set XL
More infoThis diagnostics kit includes the following products:
- EMCheck® MWMZ I
- EMCheck® LSMZ I
- EMCheck® ISMZ I
With this set you have all tools on hand to verify the EMC quality of your installed network.
-
Indu-sol EmCheck ISMZ I Current meter
More infoThe intelligent current measuring clamp EMCheck®ISMZ I is a mobile tool for detecting line-based parasitic currents in industrial plants.
-
Indu-sol EmCheck MWMZ II impedance meter
More infoThe only way to ensure good equipotential bonding is proof by measurement. The mesh resistance measuring clamp EMCheck®MWMZ II is the right tool for this purpose
EtherNet/IP troubleshooting tools
-
Indu-sol PNMA II - PROFINET/Ethernet Measuring point
Buy NowThe PNMA II measuring point/access point is designed to provide easy access to connect diagnostic equipment without interrupting the process. An access point is recommended by PI and should be between the Controller and first switch. The PNMA II is industrially harden and well made.
-
Helmholz TAP IE 100, Ethernet Test Access Point
More infoThe TAP IE 100 access point/measuring point is designed to provide easy access to connect diagnostic equipment without interrupting the process. An access point is recommended by PI and should be between the Controller and first switch. The TAP IE 100 is small and can easily fit into your cabinet.
-
Indu-sol EtherNet/IP Agent
More InfoThe agent is a measuring point/access point plus a basic non-intrusive network monitor. It appears as a EtherNet/IP IO-Device and with simple programming in your controller, you can see who is on the network and measures Jitter, telegram gap, and update rate.
-
Indu-sol EtherNet/IP-Inspektor
Buy NowTheEtherNet/IP-INspektor® is a non-intrusive detailed network monitor that can be easy accessed by a web-browser. It provides detailed information on the health of your network and a history of what has happened. No programming required.
-
PRONETIQS IntraVUE
Buy NowChange the description to: IntraVUE is a software package that will actively scan your network. It maps every device and connection, identifies developing issues, and displays the network as a living, interactive topology.
-
Profitap ProfiShark 100M
More infoProfishark/EtherTAP is an aggregating TAP used to monitor Ethernet data via a USB connection to your computer.
- 10/100M monitoring on USB
- Non-intrusive, passive monitoring
-
Profitap ProfiShark 1G
More infoProfishark/EtherTAP is an aggregating TAP used to monitor Ethernet data via a USB connection to your computer.
- 10/100/1G monitoring on USB 3.0
- Non-intrusive, fail-safe monitoring
-
Indu-sol EMCheck measuring clamp set XL
More infoThis diagnostics kit includes the following products:
- EMCheck® MWMZ I
- EMCheck® LSMZ I
- EMCheck® ISMZ I
With this set you have all tools on hand to verify the EMC quality of your installed network.
-
Indu-sol EmCheck ISMZ I Current meter
More infoThe intelligent current measuring clamp EMCheck®ISMZ I is a mobile tool for detecting line-based parasitic currents in industrial plants.
-
Indu-sol EmCheck MWMZ II impedance meter
More infoThe only way to ensure good equipotential bonding is proof by measurement. The mesh resistance measuring clamp EMCheck®MWMZ II is the right tool for this purpose
