Below are our featured products. We sell all of the products made by our vendors. If you don't see what you are looking for here please contact us.

PROFIBUS Gateway

  • Helmholz NetLink Pro Compact Ethernet to Profibus gateway

    • Up to 32 MPI/PROFIBUS connections
    • Easy configuration via web interface
    • Variables can be monitored in a browser window
    More info 

  • Thorsis isNet Lite Headstation

    The isNet Lite Headstation is used to create a PROFIBUS gateway with the following Thorsis modules.

    Buy Now 

  • Thorsis isNet DP module

    The isNet DP module extends the main module isNet Lite to work as a PROFIBUS DP Ethernet Gateway.

    • single channel version
    More Info 

  • Thorsis isNet DP-2 module

    The isNet DP-2 module extends the main module isNet Lite to work as a PROFIBUS DP Ethernet Gateway.

    • dual channel version
    More info 

  • Thorsis isNet DiagM PA module

    The isNet DiagM PA is a stationary PROFIBUS PA diagnostic and master module

    More info 

PROFIBUS Couplers

  • Helmholz DP to DP coupler

    • connects two PROFIBUS DP networks
    • Electrical isolation between the PROFIBUS networks
    • Setting of the PROFIBUS addresses using DIP switches or software
    More info 

  • Helmholz DP to PN coupler

    • It allows data transfer between a PROFIBUS master and a PROFINET controller.
    • Setting of the PROFIBUS addresses using DIP switches or software
    More info 

Ethernet Couplers

  • Helmholz PROFINET to PROFINET coupler

    • Configuration with GSDML file, no further software required
    • No influence on the opposite side in case of failure of the bus system
    • PROFINET transmission rate 100 Mbps
    More info 

  • Helmholz PROFINET to ModbusTCP coupler

    • Supports the full ModbusTCP address space with free assignment of IO data
    • Supports multiple ModbusTCP clients accessing simultaneously
    • Configuration only with GSDML file, no further software required
    More info 

  • Helmholz PROFINET to EtherNet/IP coupler

    • 3 input and 3 output assemblies
    • Configuration just with GSDML file, no further software necessary
    • EDS file downloadable
    • Diagnostics website
    More info 

  • Helmholz PROFINET to MQTT coupler

    • Separate networks for PROFINET and MQTT connection
    • Up to 100 values can be configured for transmission simultaneously
    More info 

Ethernet (PROFINET or Modbus TCP or HART-IP) to HART gateway

  • Thorsis isNet Lite Headstation

    • connect up to 5 fieldbus modules
    • DIN rail mountable
    • expansion module isNet H@rt for direct integration of HART field devices
    Buy Now 

  • Thorsis isNet H@RT4 module

    • requires isNet Lite head station
    • 4 single width channels
    • up to 5 modules per head station
    Buy Now 

  • Thorsis isNet H@RT8 module

    • requires isNet Lite head station
    • 8 double width channels
    • up to 5 modules per head station
    More info 

  • Thorsis isNet H@RT8 + AI module

    • 8 independent HART masters
    • provides 24V DC power source
    • field devices connect via 2-wires
    More info 

Modbus TCP to Modbus RTU Gateway

  • 4Next MDB-E Ethernet serial converter

    If you are looking for an easy-to-use Modbus TCP to RTU Gateway, then this one is for you. All the setup is done via the iBridge Android app.

    More info 

PROFINET to CAN Gateways

  • PROFINET / CAN-Gateway CANopen Master

    • CANopen Master according to CANopen® protocol DSP 301
    • Up to 126 CANopen slaves
    • Up to 1 Mbit/s CAN bit rate
    More info 

  • PROFINET / CAN-Gateway CANopen Slave

    • CANopen Slave Device according to CANopen protocol DSP 301
    • Up to 16 TPDOs / 16 RPDOs
    • Up to 1 Mbit/s CAN bit rate
    More info